Wallart Brewing Equipment

Fermenter-CCT-ZKT-Holvrieka-Ziemann

PRESSURE VESSELS (21 HL)


Pressure vessels for maturation
Stainless steel on feet
1,03 bar pressure
CIP ball
Manhole
Sample tap
Safety device
Built by RIPLEYS STAINLESS STEEL LTD (UK)

6 tanks available

 




Fermenter-CCT-ZKT-Holvrieka-Ziemann

STAINLESS STEEL TANKS


 

Stainless steel tanks equipped with :

  • Manhole
  • Side glass level
  • Sample tap
  • 2 outlets pipes for clarification
  • Bubbling units

Atmospheric pressure

 

5 tanks (12.250 litres storage capacity) :

  • 2 x 3200 litres
  • 1 x 3000 litres
  • 1 x 1550 litres
  • 1 x 1300 litres

 




Bright-Beer-Tank-BBT-TBF-Holvrieka-Ziemann

PRESSURE TANKS (314 HL)


 

Stainless steel tanks on feet

Volume : 314 hectoliters

Working pressure : 1,5 bar

Equiped with washing ball and manhole.

Weighing cell on feet.

4 tanks available




Filter-Schenk-KHS-Krones-Kieselguhr-PVPP

ALDOX WATER DEAERATOR (100 HL / HOUR)


ALDOX equiped with buffer tank

 

AP type 315

Capacity : 10 m3 / hour

Residual oxygen : 0,5 ppm

Inline oxygen measure

Made of Stainless steel 316L

Currently equiped with one column (a second one can be added)

Deaerated water caracteristics

Inlet pressure : 100 kPa

Inlet temperature : 10 – 20 °C

Stripping temperature : 10 – 20 °C

Outlet pressure : 200 kPa

Outlet temp : 10 – 20 °C

Installed power : 3 kW

Feed pump power : 2,2 kW

CIP capacity 10 mÑ/h

Stripping gas (N2) caracteristics

Inlet pressure : min. 600 kPa

Gas purity : min. 99.95%

Approximate gas consumption : 2.5kg/h (N2) / 2 NmÑ/h

N2 utilization : +/- 9% is dissolved into the water

Buffer Tank :

Capacity : 2 m3

Working pressure : 200 kPa

Design pressure : 250 kPa

CIP / Sterilizsation temperature : 95 °C

CIP / Sterilization flow rate : 10 m3/hr




Filter-Schenk-KHS-Krones-Kieselguhr-PVPP

FLASH PASTEURISER (10.000 LITERS / HOUR)


Flash pasteuriser – 10.000 l/h

Recent elecrical cabinet

– APV plate heat exchanger

– Tubular warmer

– 1 beer chiller (Alfa-laval)

– 1 beer warmer (for bottle re-fermentation)

– Direct steam feeding with condensat recovery unit

– 1 beer pump

– 2 coupling lanterns




BRIGHT BEER TANK (50 HL)

PRESSURISED VESSELS (50 HL)


          Full stainless steel

          Capacity : 50 hectoliters

          Tank pressure : 2 bar

          CIP ball (DN 40)

          Beer outlet DN 40

          Sample tap

          Manhole door

          Over pressure and anti vacuum device

 




Bright-Beer-Tank-BBT-TBF-Holvrieka-Ziemann

PRESSURISED VESSELS (80 HL AND 60 HL)


Pressurised vessels

                6 x 60 hl – Built by Lübck – 2,5 bar pressure

                4 x 80 hl – Built by Schmiding – 3 bar pressure

Manhole, sample tap




Bright-Beer-Tank-BBT-TBF-Holvrieka-Ziemann

PRESSURISED VESSELS (120 HL)


         Full stainless steel

         Capacity : 120 hectoliters

         Tank pressure : 2 bar

         Glycol cooling zone

         CIP ball (DN 40)

         Beer outlet DN 40

         Sample tap

         Manhole door

         Over pressure and anti vacuum device

 




Bright-Beer-Tank-BBT-TBF-Holvrieka-Ziemann

PRESSURE TANKS (646 HL)


 

Stainless steel tanks on feet

Volume : 646 hectoliters

Working pressure : 1,5 bar

Equiped with washing ball and manhole.

Weighing cell on feet.

 

5 tanks available

 




Bright-Beer-Tank-BBT-TBF-Holvrieka-Ziemann

PRESSURE TANKS (888 HL)


 

Stainless steel tanks on feet

Volume : 888 hectoliters

Working pressure : 1,5 bar

Equiped with washing ball and manhole.

Weighing cell on feet.

 

3 tanks available




Bright-Beer-Tank-BBT-TBF-Holvrieka-Ziemann

PRESSURISED VESSELS (1270 HL)


Built by HOLVRIEKA

Stainless steel (AISI 304)

Insulated 100 mm polyurethan foam

Volume : 1270 hl (gross) – 1260 hl (net)

Pressure of the vessel : 2 bar (work pressure) – 2,6 bar (tested pressure)

Tank equipped with :

–      Over pressure and anti vacuum device

–      CIP ball

–      Manhole in the bottom

Overall dimensions :  Diameter : 3750 mm – Height : 15000 mm

Weight : 9500 Kg

 

6 vessels available

Dismantled and ready to go !




Bright-Beer-Tank-BBT-TBF-Holvrieka-Ziemann

CIP (3 X 150 LITRES)


 

Too Late !

Sorry, we have sold this equipment already.

However, we’d be very glad to source similar equipment for you. 

Please tell us what you need and we’ll do our best to find it for you !

Contact : info@wallart.fr




Bright-Beer-Tank-BBT-TBF-Holvrieka-Ziemann

5 VESSEL HOT CIP


Too Late !

Sorry, we have sold this equipment already.

However, we’d be very glad to source similar equipment for you. 

Please tell us what you need and we’ll do our best to find it for you !

Contact : info@wallart.fr




Krones-SIDEL-KHS-filler-labeller-tunnel-pasteuriser

ALSIM MIXER (30,000 LITRES / HOUR)


Type MAS MIX IS 30 (30.000 litres / heure)

For soft drinks and still products :

  • Possibility to inject nitrogen
  • UV treatement from WEDECO type Spektron 70

Installed power : 40 kW

 




Krones-SIDEL-KHS-filler-labeller-tunnel-pasteuriser

TUNNEL PASTEURIZER (8000 BPH X 33 CL)


 

Tunnel pasteurizer built by company A2TI (France)

Stainless steel with Intralox mat (one deck)

Useful surface : 16 m2

Capacity with 33 cl bottles : 8000 bottles / hour

6 heating zones + 1 cooling zone

Electrical cabinets (SIEMENS S7 & SIMATIC touch-screen)

 

 




SIDEL-KRONES-KHS-PET-blow-moulder-syrup-room

TUNNEL PASTEURISER (50,000 BPH)


 

Too Late !

Sorry, we have sold this equipment already.

However, we’d be very glad to source similar equipment for you. 

Please tell us what you need and we’ll do our best to find it for you !

Contact : info@wallart.fr




Bottle-washer-2

BOTTLE WASHER (16,000 BPH)


 

Too Late !

Sorry, we have sold this equipment already.

However, we’d be very glad to source similar equipment for you. 

Please tell us what you need and we’ll do our best to find it for you !

Contact : info@wallart.fr

 




Krones-SIDEL-KHS-filler-labeller-tunnel-pasteuriser

ONE WAY GLASS BOTTLING LINE (4500 BPH X 75 CL – 6500 BPH X 33 CL)


Too Late !

Sorry, we have sold this equipment already.

However, we’d be very glad to source similar equipment for you. 

Please tell us what you need and we’ll do our best to find it for you !

Contact : info@wallart.fr




Krones-SIDEL-KHS-filler-labeller-tunnel-pasteuriser

RGB LINE FOR CARBONATED DRINKS (6000 BPH)


Too Late !

Sorry, we have sold this equipment already.

However, we’d be very glad to source similar equipment for you. 

Please tell us what you need and we’ll do our best to find it for you !

Contact : info@wallart.fr




Krones-SIDEL-KHS-filler-labeller-tunnel-pasteuriser

ALSIM VOLUMETRIC PET FILLING BLOCK


Rinser-Filler-capper (80/90/10)

  • Rinser : 80 nozzles
  • Filler : 90 volumetric filling valves
  • Capper : 10 heads (1810 PCO) built by ADELSKI

Was used to fill : Ice tea, soft drinks with stevia, carbonated and still water

Possibility to use Nitrogen injection for still products

Ultra sonic foam breaker from CAVITUS (when filling carbonated drinks with stevia)

Sterilising system from INNOWATECH type GXL

 




Krones-SIDEL-KHS-filler-labeller-tunnel-pasteuriser

CAN RINSER - FILLER - SEAMER (38,000 CPH)


 

Too Late !

Sorry, we have sold this equipment already.

However, we’d be very glad to source similar equipment for you. 

Please tell us what you need and we’ll do our best to find it for you !

Contact : info@wallart.fr




Krones-SIDEL-KHS-filler-labeller-tunnel-pasteuriser

PET LINE FOR CARBONATED DRINKS (21,000 BPH x 1,50 LITER & 18,000 BPH x 2 LITERS)


Too Late !

Sorry, we have sold this equipment already.

However, we’d be very glad to source similar equipment for you. 

Please tell us what you need and we’ll do our best to find it for you !

Contact : info@wallart.fr




Krones-SIDEL-KHS-filler-labeller-tunnel-pasteuriser

PET LINE FOR STILL WATER (22.000 bph x 150 cl)


Too Late !

Sorry, we have sold this equipment already.

However, we’d be very glad to source similar equipment for you. 

Please tell us what you need and we’ll do our best to find it for you !

Contact : info@wallart.fr




Krones-SIDEL-KHS-filler-labeller-tunnel-pasteuriser

PET FILLING LINE (26,000 X 0,5 L) STILL AND CARBONATED


PET filling line for still water and carbonated soft drinks

 

26,000 bph x 0,5Litre bottles

Neck finish : 1881

Packs : 2 x 3 film only

Euro and half pallets

 

 

Including :

 

                   Preform loading system from MUCHI

 

                   KRONES Contiform S20 blow moulder

 

                   KRONES air conveyors

 

                   SACMI mixer type KRISTALL MIX KM 300-3CV

 

                   SACMI block

Labeler OPERA 200 RF 18 (720-18-1) hot glue

Filler Integrale Vega N.H.18-54-117-11 (pitch : 125mm)

 ZALKIN capper 14 heads type SV-14-560-126

                       

                   TRANSPAC full bottle conveyors

                  

                   FILTEC Inspection (type SPECTROVISION 900). Fill level and label

 

                   ELMED metal detection type ARGUS-5/MSG1000

 

                   FILTEC laser dater type LaseTec-II

 

                   KHS shrinkwrapper type INNOPACK SP-060-V (2×3 bottles). Printed film

 

                   APOLLO upwards spiral conveyor

 

                   TRANSPACK pack conveyors

 

                   VIDEOJET pack dating device type VJ-1610

 

                   APOLLO downwards spiral conveyor

 

KHS palletiser type INNOPAL PB-1N2

    

ROBOPACK pallet conveyors type HELIX HS 40

                

            KHS pallet stretcher

                

LOGOPAK pallet labeller type 920-II-PFRK

                  

Siemens automation

Machines from 2002-2010

Many spare parts available




Krones-SIDEL-KHS-filler-labeller-tunnel-pasteuriser

5 GALLON JAR FILLING LINE


 

500 jars/hour

19 liters polycarbonate jars (can also work with 3 gallons).

BARDI & SIDEL




Krones-SIDEL-KHS-filler-labeller-tunnel-pasteuriser

5 GALLON WATER BOTTLING LINE


3 & 5 gallon water bottling line

600 jars / hour

Scope of supply : 

– Depalletization unit :

By KOSME with FANUC robot type M-900 IA600 from 2010 with 3 heads

2 sets of 3 heads to handle both wooden Euro-pallets (800 x 1,200) and plastic racks (6 bottles on 8 lays)

Including Layer removal

 

– Pallet conveyors :

with metalic chains Including pusher for plastic racks

 

– Jar conveyors :

With plastic chains and rolls

Including accumulation table

 

– Empty jar inspection :

Foreign object detection with ejector from FT SYSTEMS type CT 620 from 2009

 

– Cap removal unit :

By BARDI from 2005 with ejector

 

– Jar testing unit :

By BARDI with 3 heads model LT20 from 2005 with ejector

 

– Washing & filling unit :

Washer : Full stainless steel machine by UAT with 3 rows type Universal from 2005 fitted to work with 2 heating systems : by steam or by electricity – MITSUBISHI automation

Filler :  Full stainless steel machine by UAT with 3 filling valves type Universal from 2005

fitted with laminar flow – with full ss buffer tank of 2,500 Liters & its pump

MITSUBISHI automation

 

Possibility to recover cold room panel where the filling section stands

 

– Ink Jet coding unit :

VIDEOJET type EXCEL 2000

– Palletization unit :

By KOSME with FANUC robot type M-900 IA600 from 2010 with 3 heads

2 sets of 3 heads to handle both wooden Euro-pallets (800 x 1,200) and plastic racks (6 bottles on 8 lays)

Including Layer application

 

Pallet foiling unit

By TOSA (Italy) model 221 from 2009

 

Automation

SIEMENS S7 on all the line except washer-filler that are MITSUBISHI




SIDEL-KRONES-KHS-PET-blow-moulder-syrup-room

SIDEL PET BLOW MOULDER TYPE SBO 10 (38 MM NECK)


Sidel blow moulder

Type SBO 10

Capacity : 14.000 bph

Built in 2000

Neck finish : 38 mm

Including :

  • Preform loading system (box turner, hopper, elevator and preform distributor)
  • Blow mouder
  • Heat suction hood with engine and silencer

 




Equiped with neck PCO 1810 3 sets of moulds : 0,5L – 1,0L – 2L Box tipper, hopper and preform feeding system

SIDEL BLOW MOULDER SBO 14


Equiped with neck PCO 1810

3 sets of moulds : 0,5L – 1,0L – 2L

Box tipper, hopper and preform feeding system

 

 




SIDEL-KRONES-KHS-PET-blow-moulder-syrup-room

PET BLOW-MOULDER KRONES TYPE CONTIFORM C314


Too Late !

Sorry, we have sold this equipment already.

However, we’d be very glad to source similar equipment for you. 

Please tell us what you need and we’ll do our best to find it for you !

Contact : info@wallart.fr




Krones-SIDEL-KHS-filler-labeller-tunnel-pasteuriser

SELF ADHESIVE LABELER (4.500 BPH)


Self adhesive labeler

Built by ETICAP in 2014

5 heads and 3 labelling stations :

  • Body
  • Back
  • Neck

 

Currently equiped  for :

  • 75 cl APO
  • 75 cl Belgium beer
  • 33 cl APO
  • 33 cl long neck

 

Capacity :

                33 cl bottles : 4500 bottles per hour

                75 cl bottles : 3000 bottles per hour

 




Krones-SIDEL-KHS-filler-labeller-tunnel-pasteuriser

GLASS BOTTLE ADHESIVE LABELER (5000 BPH)


 

MAKRO adhesive labeler

Year of manufacture : 2017

6 electronic sellettes (capacity : 5000 bottles / hour with 33 cl and 75 cl)

1 labelling station (possibility to add a second one)

Inkjet coder from LEIBINGER for print on label or on the bottle

Bottle formats :

    • 75 cl APO
    • 33 cl long neck
    • 33 cl APO

Bottle Inlet on the right outlet on the left 




Krones-SIDEL-KHS-filler-labeller-tunnel-pasteuriser

KRONES LABELLER TYPE CONTIROLL HS


25,000 bph

Equipment in excellent condition – Built in 2011

Can be inspected in production

 




Keg-filling-line-2

KEG FILLING LINE (60 KEGS / HOUR)


 

Keg filling line from GRUBER type KEGMATIK 4/1 with 5 heads

60 Kegs per hour

Including : Keg conveyors, external washer, cleaning & filling line & CIP




Krones-SIDEL-KHS-filler-labeller-tunnel-pasteuriser

PALLET WRAPPING MACHINE (ROBOPAC)


 

Robopac rotating ring stretch wrapper

2 roll system

Type Genesis HS 50 / 2

Capacity : up to 130 pallets / hour       

Machine from 2017

 




Krones-SIDEL-KHS-filler-labeller-tunnel-pasteuriser

WRAP AROUND PACKER (UP TO 10,000 BPH)


Wrap around packer

Built by Goosens in 2004

Type S40

Currently runs with packs of 6 x 15 cl bottles

Capacity : up to 10,000 bph

 




Krones-SIDEL-KHS-filler-labeller-tunnel-pasteuriser

PACK PALLETISER (30.000 BPH)


Too Late !

Sorry, we have sold this equipment already.

However, we’d be very glad to source similar equipment for you. 

Please tell us what you need and we’ll do our best to find it for you !

Contact : info@wallart.fr




Krones-SIDEL-KHS-filler-labeller-tunnel-pasteuriser

PACK PALLETISER (36,000 BPH)


 

Palettiseur

Built by OCME 

Type P115

Capacity : 36.000 bph

PLC Siemens S7

Includes :

                Pack divider built by LM

                Preparation of the layers

                Pallet Magasin

                Palletisation

                Interlayer applicator

 

Pallet processed :

·         ½ palette

·         80×120

·         100×120

 




CO2-steam-boiler

HORIZONTAL LIQUID CO2 STORAGE TANK (10,000 LITRES)


 

Horizontal tank, made of steel, with 2 bearing shells
Built by Walter Krâmer
Tankinsulated with PU-foam, with
galvanized aluminium sheet.
Tank with weighing system and cooling unit.

Volume :  10.000 liters
Diameter : ca. 1.600 mm
Overall length : ca. 5.800 mm
Working pressure : 25 bar

 




Cuve-CO2

VERTICAL CO2 STORAGE TANK


Capacity : 58,470 litres
Working pressure : 17,5 bar – Test pressure : 22,8 bar
Internal diameter : 2,800 mmTotal height : 11,217 mm
Empty weight : 11 tons
Insulated with approximately 100 mm foam




Krones-SIDEL-KHS-filler-labeller-tunnel-pasteuriser

42 BAR AIR COMPRESSOR (695 M3 / HOUR)


42 bar compressor

Built by ABC (Spain)

Effective flow m3 / min : 11,575

RPM 720

4 stages compressor

Weight : 7500 Kg

 




CO2-steam-boiler

ATLAS COPCO 42 BAR AIR COMPRESSOR (880 M3 / HOUR)


ATLAS COPCO high pressure air compressor

42 bar

880 m3/hour

Type P 180-50

Machine built in 2015, never installed

Dimensions : 4885 x 2234 x 2500 mm

Weight : 8500 Kg

 

 




CO2-steam-boiler

BOSCH STEAM BOILER (12 TONS / HOUR AT 26 BAR)


Too Late !

Sorry, we have sold this equipment already.

However, we’d be very glad to source similar equipment for you. 

Please tell us what you need and we’ll do our best to find it for you !

Contact : info@wallart.fr