BREWING EQUIPMENT

PACKAGING EQUIPMENT

image_pdfimage_print
  • New entry
  • VIEW

    MICRO BREWERY (5 HL NET PER BREW)

    • Posted by WALLART EQUIPMENT
    • On 9 avril 2018
    Micro brewery (5 hl net per brew) Micro brewery (5 hl net per brew) including :      Hot water tank Volume 750 litres gross Electrical heating Stainless steel tank with wooden cladding      Mashing vessel 710 litres gross volume Full stainless steel tank with agitator, electrical heater and manhole Built in 2016    […]
  • New entry
  • VIEW

    20 HL BREWHOUSE WITH MEURA MASH FILTER

    • Posted by WALLART EQUIPMENT
    • On 25 janvier 2018
    20 hl brewhouse offering the possibility to use the lauter tune or the mash filter Plant composed of : 1. MALT HANDLING – Conventional malt mill for lauter tune 2 roller mill magnets to protect the mill + flow spreader for equil amount of malt all over the mill. Big malt hopper. – Flower mill […]
  • New entry
  • VIEW

    COMBI FILTER (KIESELGUHR + POLISHING) – 100 HL / HOUR

    • Posted by WALLART EQUIPMENT
    • On 17 octobre 2017
    Filtration plant including : – SEN combi filter capacity : 100 hl/h type SEITZ ORION OF 100/150 – 1.000 x 1.000 fitted with 15 chambers on kieselguhr side and 78 plates on polishing side + end plates Kieselguhr : 15 x 0,95 m2 x 2 = 28,5 m2 = 100 hl/h Kieselguhr recovery unit : […]
  • New entry
  • VIEW

    WESTFALIA CENTRIFUGE (120 HL / HOUR)

    • Posted by WALLART EQUIPMENT
    • On 28 mars 2018
      Centrifuge built by Westfalia Type CSA 160 – 47 – 076 6800 tr / minute Capacity with beer : 120 hl / hour With tools Very recent pneumatic and electrical cabinet Siemens S7 automation
  • New entry
  • VIEW

    FLASH-PASTEURISER (100 HL / HOUR)

    • Posted by WALLART EQUIPMENT
    • On 17 octobre 2017
    Flash pasteuriser – 100 hl/h Recent elecrical cabinet – APV plate heat exchanger – Tubular warmer – 1 beer chiller (Alfa-laval) – 1 beer warmer (for bottle re-fermentation) – Direct steam feeding with condensat recovery unit – 1 beer pump – 2 coupling lanterns
  • New entry
  • VIEW

    MIXER (24,000 LITRES / HOUR)

    • Posted by WALLART EQUIPMENT
    • On 29 septembre 2017
    KHS Mixer type INNOPRO PARAMIX Mixes: Water, sirup, CO2 Fitted to produce carbonated and non-carbonated soft-drinks Capacity : 24.000 Litres per hour
  • New entry
  • VIEW

    GLASS FILLER-CAPPER FOR STILL PRODUCTS (2700 BPH)

    • Posted by WALLART EQUIPMENT
    • On 20 février 2018
    Filler-Capper built by  EURO STAR Type MEC LD 12 / 1 C Year of manufacture 2016 12 filling heads 1 capping head Used for still products, is equipped to fill the following bottles Steinie 33 cl Long neck 33 cl Apo 33 cl Belgian beer 75 cl Champagne 75 cl Capacity : 2700 bph with  […]
  • New entry
  • VIEW

    RETURNABLE GLASS BOTTLING LINE (3000 BPH)

    • Posted by WALLART EQUIPMENT
    • On 24 janvier 2018
    Returnable glass bottling line for beer Capacity : 3000 bph with 33 cl (2000 bph with 75 cl bottles) Bottle sizes : 25 cl, 33 cl, 75 cl Very compact line : 10 x 8 metres Bottle washer Built by Vandergeeten – 12 rows Residual soda detection Built by CC Concept Technic in 2002 Crate […]
  • New entry
  • VIEW

    ONE WAY GLASS BOTTLING LINE (3000 BPH)

    • Posted by WALLART EQUIPMENT
    • On 24 janvier 2018
    One way glass bottling line for beer Capacity : 3000 bph with 33 cl (2000 bph with 75 cl bottles) Bottle sizes : 25 cl, 33 cl, 75 cl Filler-capper Isobarometric filler Built by ALFATEK in 2000 – 4 heads for vacuum and CO2 sweep – 15 filling heads – 1 capping head Labeller Built […]
  • New entry
  • VIEW

    GLASS BOTTLE RINSER + FILLER-CAPPER (6000 BPH)

    • Posted by WALLART EQUIPMENT
    • On 21 décembre 2017
    PROCOMAC rinser Type rotostar 1R-7-28-118 28 rinsing nozzles Manual adjustment of bottle height Currently runs with 25 cl – 33cl and 75 cl bottles Filler – capper BC (Bottling & Canning) Type RPV Master PLC Siemens S5 Currently runs with 25 cl – 33cl – 37,5cl – 75 cl – and 150 cl bottles Capacity […]
  • New entry
  • VIEW

    PET FILLING LINE FOR EDIBLE OIL (UP TO 10.000 BPH)

    • Posted by WALLART EQUIPMENT
    • On 27 septembre 2017
    EDIBLE OIL PET FILLING LINE Capacity : up to 10,000 bph Bottles of 1 lire and 2 litres 2 Blow moulders – ADS Type G64B (4 cavities) – Rotary blow moulder (2 cavities) 40 bar air compressor Atelier François Silos 2 silos for PET bottle storage (12 hour storage capacity) Unscrumbler Procomac PET unscrambler type […]
  • New entry
  • VIEW

    PET FILLING BLOCK (30,000 BPH) ESL-EXTENDED SHELF LIFE

    • Posted by WALLART EQUIPMENT
    • On 29 mars 2018
    ALSIM filling block (30,000 bph x 1 Litre) Type RVP 120/15K from 2002 with clean chamber above ESL Filling (Extended Shelf Life) for ice tea, juices, products without preservatives, limonades PCO 28 mm neck Currently runs with 0,5L – 1 L – 2 Litre bottles • Paracetic rinsing • Rinsing with water (sterilised by UV) […]
  • New entry
  • VIEW

    NORTAN CAPSULE APPLICATOR (CHAMPAGNE TYPE)

    • Posted by WALLART EQUIPMENT
    • On 30 avril 2018
    Capsule applicator with spinning heads Unit for dispensing and rolling for multi-rolled and tin capsules. Nortan type Prisma 240 S With : – Automatic distributor of capsules (capacité : 1800 capsules) – 8 head capsule applicator – 24 head roller turret to smooth the capsules Capacity : up to 15,000 bph Currently run with : […]
  • New entry
  • VIEW

    SIDEL PET BLOW MOULDER (SBO16)

    • Posted by WALLART EQUIPMENT
    • On 29 septembre 2017
    PET BLOWER SIDEL from 1998 Type SBO 16/16 serie 1 Equiped with 50 cl  and 150 cl moulds (PCO28mm neck finish) Format changing time : 2 hours With complete preform loading unit (box turner, hoper, elevator & chute) Chiller for the moulds BLUE BOX model 1YE
  • New entry
  • VIEW

    LINEAR LABELLER (4000 BPH)

    • Posted by WALLART EQUIPMENT
    • On 25 janvier 2018
      PE labeller Type Splendid L3 Paper pre-cut  labels (partial and wrap around labels) Cold glue Built in 2000 Capacity : up to 4000 bph Runs with several formats up to 75 cl bottle
  • New entry
  • VIEW

    LABELLER (SELF ADHESIVE LABELS) 7.000 BPH

    • Posted by WALLART EQUIPMENT
    • On 2 octobre 2017
      Champagne type labeller KOSME TOP STAR 1280 15 sellets (7000 bph x 75cl) 4 self adhesive labelling stations 1 glue station for neck label Yom : 2 000
  • New entry
  • VIEW

    PET FILLING BLOCK FROM KHS (16.000 BPH X 150 CL)

    • Posted by WALLART EQUIPMENT
    • On 29 septembre 2017
    FILLING BLOCK : – KHS RINSER Type INNOCLEAN FR-EM 45/125 One stage rinser with 45 nozzles – KHS FILLER Type EV-VF 80/10SV 80 filling valves – Pitch : 113 mm – ALCOA CAPPER Type KUPI 10/540-98 10 heads – PCO 28 mm – CAP FEEDING UNIT Hopper – Elevator – Chute
  • New entry
  • VIEW

    PET BOTTLE LABELLER (16.000 BPH x 1,5 L)

    • Posted by WALLART EQUIPMENT
    • On 29 septembre 2017
      KRONES PET LABELLER Type CONTIROLL with hot glue unit Polypro labels in rolls Built in 2000 Currently running with 0,5 L and 1,5 L bottles
  • New entry
  • VIEW

    KEG FILLER (1 HEAD)

    • Posted by WALLART EQUIPMENT
    • On 25 janvier 2018
      Built by SIFA in 2002 Type Masterkeg 2 vessel CIP Capacity 20 kegs per hour Equiped for A type extractor tube
  • New entry
  • VIEW

    STEAM BOILER GAZ/FUEL BURNER (8 TONNES @ 10 BAR)

    • Posted by WALLART EQUIPMENT
    • On 11 septembre 2017
    Mounted on a frame Manufacturer : LOOS, Gunzenhausen Type : UL-S 8000 heating surface approx. : 170 qm Capacity max. : 8.000 kg/h So far operated with : 7.000 kg/h Former allowable working pressure : 10,0 bar Increased test pressure : 19,0 bar Water contents low level approx. : 10.900 ltr Water contents full approx. […]